Report \"stuck at 1%\" bugs here

Message boards : RALPH@home bug list : Report \"stuck at 1%\" bugs here

To post messages, you must log in.

Previous · 1 . . . 4 · 5 · 6 · 7

AuthorMessage
Moderator9
Volunteer moderator

Send message
Joined: 16 Feb 06
Posts: 251
Credit: 0
RAC: 0
Message 1225 - Posted: 18 Apr 2006, 20:26:02 UTC - in response to Message 1222.  
Last modified: 18 Apr 2006, 20:35:47 UTC

Tony, I agree with you as well. The directive from the dev's is *not* to abort work units unless specifically asked to. https://ralph.bakerlab.org/forum_thread.php?id=18

If it's not giving you any problems and progressing properly, let it crunch!

David, that's part of the question I need answered, it's a timex, in that it keeps crunching, graphics work well, all the bits move, % done advances, CPU time advances, and even the "estimate to completion" moves, but it keeps getting higher. This could be due to the way win98 counts time.

I see it run "Ab initio", then switch to "full atom relax", then it loops back to "ab initio" and starts all over again. All the while staying on "model 1". Is this how others see it working? I was thinking it did "ab initio", then "full atom relax", and then switched to the next model, but I'm not sure which way is "normal".

tony


Tony,

What is your Ralph time setting? I presume this Work Unit is WAY beyond the time it should have quit, since it seems ot have not finished a single model yet. If you can find some way to make it think it is done so it can report normally (with errors) that would be great. But assuming you are running the "Debuger" stuff Ron has been talking about and the 5.4.x BOINC it may return enough data no matter how it finishes.

I see the system this is on is a Windows 98 machine. There are some issues with Windows 98 that they hope are fixed in version 5.0. There are not a lot of Windows 98 machines attached to RALPH right now. So (here is where I am going out on that limb) in MY opinion, you should abort the Work Unit and update to version 5.0.

BUT WAIT!!!

I am going to bring this to the Project team and let them chime in here for a final opinion, as you have something unique going on there.

At the same time I will point out the need to clearly state what people should do at the time of a new release. Perhaps we can even get them to add something telling all of us what they are testing.

Please stand by

EDIT: Message sent

Moderator9
RALPH@home FAQs
RALPH@home Guidelines
Moderator Contact
ID: 1225 · Report as offensive    Reply Quote
Profile Astro

Send message
Joined: 16 Feb 06
Posts: 141
Credit: 32,977
RAC: 0
Message 1226 - Posted: 18 Apr 2006, 21:06:14 UTC
Last modified: 18 Apr 2006, 21:21:46 UTC

Thank you

This old machine just keeps chugging and I have no problem letting it continue as long as it may be useful. I don't care if it wants to run 2000 hours. I'm getting interested if it'll finish at 100%(that's 100 days from now at this rate,LOL)

There is no debug software on that old machine (it's stuffed under an end table in the corner (ultra microatx frame), has no mouse, no keyboard,no monitor, it's only viewable via Realvnc. It is hooked to an UPS, but my fear is the memory leaks will be what causes this to stop crunching and not some other error.

It's now at 3.5633% done, 122:54:06, stage Full atom relax, Model 1, Step 34155, 124:39:17 remaining, oh yeah, there's 24 red dots now (whatever the red dots are)

My Ralph prefs:

Resource share
If you participate in multiple BOINC projects, this is the proportion of your resources used by RALPH@home 10
Percentage of CPU time used for graphics not selected
Number of frames per second for graphics not selected
Target CPU run time 4 hours
Miscellaneous
Should RALPH@home send you email newsletters? yes
Should RALPH@home show your computers on its web site? yes
Default computer location home

my general prefs:

Processor usage
Do work while computer is running on batteries?
(matters only for portable computers) yes
Do work while computer is in use? yes
Do work only between the hours of (no restriction)
Leave applications in memory while preempted?
(suspended applications will consume swap space if 'yes') yes
Switch between applications every
(recommended: 60 minutes) 180 minutes
On multiprocessors, use at most 1 processors
Disk and memory usage
Use no more than 400 GB disk space
Leave at least
(Values smaller than 0.001 are ignored) .25 GB disk space free
Use no more than 85% of total disk space
Write to disk at most every 600 seconds
Use no more than 100% of total virtual memory
Network usage
Connect to network about every
(determines size of work cache; maximum 10 days) 3 days
Confirm before connecting to Internet?
(matters only if you have a modem, ISDN or VPN connection) no
Disconnect when done?
(matters only if you have a modem, ISDN or VPN connection) no
Maximum download rate: 200 KB/s
Maximum upload rate: 200 KB/s
Use network only between the hours of
Enforced by versions 4.46 and greater (no restriction)
Skip image file verification?
Check this ONLY if your Internet provider modifies image files (UMTS does this, for example).
Skipping verification reduces the security of BOINC. no
ID: 1226 · Report as offensive    Reply Quote
Divide Overflow

Send message
Joined: 15 Feb 06
Posts: 12
Credit: 128,027
RAC: 0
Message 1227 - Posted: 18 Apr 2006, 21:31:04 UTC
Last modified: 18 Apr 2006, 21:36:39 UTC

I had a v4.99 FACONTACTS_NOFILTERS WU that was behaving in a similar manner. Not stuck, but constant computing for the first model with incredibly slow completion % increases. After much debate, I decided something was wrong and finally aborted it after running for over 33 hours and only reaching 8% done. It was resent with the v5.00 app to another host and was finished successfully in a normal length of time. https://ralph.bakerlab.org/result.php?resultid=86791

Since I was running this on a WinxP machine, I think this problem is specific to the application and not your operating system.



ID: 1227 · Report as offensive    Reply Quote
Moderator9
Volunteer moderator

Send message
Joined: 16 Feb 06
Posts: 251
Credit: 0
RAC: 0
Message 1228 - Posted: 18 Apr 2006, 22:17:31 UTC
Last modified: 18 Apr 2006, 22:20:32 UTC

Tony,

The word from David Kim is to abort it. There is a new release coming with a kind of auto-abort feature for these kinds of loops. That of course will need testing. The plan is to automatically award credit for work units that the system auto aborts.

While I have nothing from David Kim on this last point I would assume the auto abort feature would also provide some enhanced error messages.

In any case the plan is that this will solve any looping situation (including loops caused by not keeping the application in memory).

So watch for the new version soon.

Moderator9
RALPH@home FAQs
RALPH@home Guidelines
Moderator Contact
ID: 1228 · Report as offensive    Reply Quote
Profile Astro

Send message
Joined: 16 Feb 06
Posts: 141
Credit: 32,977
RAC: 0
Message 1229 - Posted: 18 Apr 2006, 22:38:12 UTC
Last modified: 18 Apr 2006, 22:39:55 UTC

Thanks, I aborted it. WU in question

Now, it's been sent out to: RoliLSD
ID: 1229 · Report as offensive    Reply Quote
Rhiju
Volunteer moderator
Project developer
Project scientist

Send message
Joined: 14 Feb 06
Posts: 161
Credit: 3,725
RAC: 0
Message 1230 - Posted: 19 Apr 2006, 2:23:54 UTC - in response to Message 1229.  

Hi guys, we just posted the new ralph app 5.01, and are going
to try to break it!

I wanted to clarify one point. We *don't* yet have a fix
for truly hanging jobs. We do have a rough fix for jobs that
are constantly getting interrupted (say when BOINC switches
to another project) and restarted without leaving Rosetta@home in memory.
If that happens more than 5 times, we have Rosetta exit gracefully!
But the more general problem -- if the client doesn't
do anything for 10 minutes (or 100 hours as reported below!) -- isn't
fixed. YET. Working on it.

Please keep posting!

Thanks, I aborted it. WU in question

Now, it's been sent out to: RoliLSD


ID: 1230 · Report as offensive    Reply Quote
Rollo

Send message
Joined: 13 Apr 06
Posts: 4
Credit: 610
RAC: 0
Message 1250 - Posted: 19 Apr 2006, 16:28:09 UTC

This WU got stuck for more than 5 minutes without any movement at the graphics.
Than crashed before I could abort it. Version 5.00

<core_client_version>5.4.4</core_client_version>
<message>Unzulässige Funktion. (0x1) - exit code 1 (0x1)
</message>
<stderr_txt>
# random seed: 3887865
# cpu_run_time_pref: 3600
ERROR:: Exit at: .tether.cc line:411
ID: 1250 · Report as offensive    Reply Quote
Steven Purvis

Send message
Joined: 1 Mar 06
Posts: 1
Credit: 8,880
RAC: 0
Message 1252 - Posted: 19 Apr 2006, 17:40:06 UTC

I got two which seemed to keep going at 1% ish (for ralph v4.99)

Result 84721 and
Result 84734

Result 84734 I allowed to run for 19 hours, where as Result 84721 I only allowed to run for a couple of hours. The 19 hours result seemed to haev terminated itself as it never seemed to get any more points on the graphic.

I have Windows XP and BOINC CC v 5.2.7. I have just downloaded a new set of workunits with ralph beta 5.00.
ID: 1252 · Report as offensive    Reply Quote
Dotsch
Avatar

Send message
Joined: 4 Mar 06
Posts: 12
Credit: 13,725
RAC: 0
Message 1378 - Posted: 26 Apr 2006, 13:12:11 UTC

https://ralph.bakerlab.org/result.php?resultid=97260
https://ralph.bakerlab.org/workunit.php?wuid=86093
https://ralph.bakerlab.org/show_host_detail.php?hostid=2323
ID: 1378 · Report as offensive    Reply Quote
Previous · 1 . . . 4 · 5 · 6 · 7

Message boards : RALPH@home bug list : Report \"stuck at 1%\" bugs here



©2024 University of Washington
http://www.bakerlab.org