3 failures
Work Unit https://ralph.bakerlab.org/result.php?resultid=529839 failed with Exit code 1, Error exit from: hbonds.cc line: 648
Work Unit https://ralph.bakerlab.org/result.php?resultid=531669 failed with Exit code 1, Error exit from: hbonds.cc line: 624
Work Unit https://ralph.bakerlab.org/result.php?resultid=531753 failed with Exit code 193, SIGSEGV, Segmentation Violation.

Hope this helps.

Another 2 failed after only 3 minutes

https://ralph.bakerlab.org/result.php?resultid=532538
https://ralph.bakerlab.org/result.php?resultid=532562

both failed with this error

process exited with code 1 (0x1)
trouble finding jump_templates_RNA_basepairs_v2.dat
ERROR:: Exit from: read_paths.cc line: 360

Another one with the same error as above

https://ralph.bakerlab.org/result.php?resultid=532003

---

These two results crashed, after I upgraded BOINC from 5.8.16 to 5.9.12:

https://ralph.bakerlab.org/result.php?resultid=530801

https://ralph.bakerlab.org/result.php?resultid=530709

Not sure if they there actually running while upgrading, but option "Leave in memory while suspended" is enabled...

Cheers, Shai

---

My NEW BOINC-Site

Why people joined BOINC Synergy...

Computation error: 533221.

---

This WU did a crash and burn when the computer ran out of VM.

Anders n

---

After a fair run of successes my G5 Mac got a computation error (no crash AFAICT) with exit code 1 (0x1), running v5.68 on gp04__BOINC_SYMM_FOLD_AND_DOCK_RELAX_SUBSYSTEM-gp04_-delC126__2078_10 after a little over six hours of crunching. The system had been running with the screensaver blacked out and the display sleeping for at least twelve hours. The output ends with

ERROR:: Exit from: hbonds.cc line: 636

Hi: Yea I wish I'd seen all these crashes before sending out the same job to Rosetta@home. The first jobs that came back seemed OK -- now I realize that its because all the adversely affected computers were taking suuuper long and then crashed. We didn't expect those workunits to have such big memory footprints, so we'll have to spend a bit of time debugging.

After a fair run of successes my G5 Mac got a computation error (no crash AFAICT) with exit code 1 (0x1), running v5.68 on gp04__BOINC_SYMM_FOLD_AND_DOCK_RELAX_SUBSYSTEM-gp04_-delC126__2078_10 after a little over six hours of crunching. The system had been running with the screensaver blacked out and the display sleeping for at least twelve hours. The output ends with

ERROR:: Exit from: hbonds.cc line: 636

---

Work Unit https://ralph.bakerlab.org/result.php?resultid=534823 failed with Exit code 1, ERROR:: Exit from: barcode_classes.cc line: 576
Work Unit https://ralph.bakerlab.org/result.php?resultid=535524 failed with Exit code 1, ERROR:: Exit from: fragments.cc line: 691

Have got a WU running at present

1acf__TREEJUMP_ABRELAX_TJTOP3_SAVE_ALL_OUT_BARCODE__2095_19_0
rosetta_beta version 568
Windows XP,
Processor: AuthenticAMD Unknown CPU Type [x86 Family 6 Model 8 Stepping 1] [fpu tsc sse 3dnow mmx]
Memory: 751.49 MB physical, 3.43 GB virtual

Same problem as mentioned above. Permanently 10 mins (exactly) to run. currently 92% complete, Progress still incrementing but 'to complete' static at 10 minutes.

BOINC running as a service so no graphics, but Windows had blanked screen as screensaver kicked in overnight.

Should I abort?

--
Rod Ellery

---

Have got a WU running at present

1acf__TREEJUMP_ABRELAX_TJTOP3_SAVE_ALL_OUT_BARCODE__2095_19_0
rosetta_beta version 568
Windows XP,
Processor: AuthenticAMD Unknown CPU Type [x86 Family 6 Model 8 Stepping 1] [fpu tsc sse 3dnow mmx]
Memory: 751.49 MB physical, 3.43 GB virtual

Same problem as mentioned above. Permanently 10 mins (exactly) to run. currently 92% complete, Progress still incrementing but 'to complete' static at 10 minutes.

BOINC running as a service so no graphics, but Windows had blanked screen as screensaver kicked in overnight.

Should I abort?


--
Rod Ellery

How long has it been running and what are your pref. run time?

---

It was running at about 2 hrs with preferred at 1 hr. It seems to have completed sometime in the last 3/4 hr. Just checking result status.

Seems to have generated a successful result. ( Result 536713

Rod

Same problem as mentioned above. Permanently 10 mins (exactly) to run. currently 92% complete, Progress still incrementing but 'to complete' static at 10 minutes.


--
Rod Ellery

When a WU takes longer than your run pref. time it looks like what you describe.

As long as the % complete increase things should be ok :)

Anders n

ps
Some of the WU-s take up to 4 H to make 1 model on my computers.

---

Segmentation Violation on this WU

This WU

---

I'm 8.5hrs in to this symm fold dock relax task and still have not completed the second model. Seems significantly higher then the 1hr/model mentioned previously.

---

Hi: Yea, about half the workunits failed on all the platforms. I'm looking into this now...

I'm 8.5hrs in to this symm fold dock relax task and still have not completed the second model. Seems significantly higher then the 1hr/model mentioned previously.

---

A compute error: 547575.

---

This WU failed. I had a Blue Screen of Death at this point. Cannot determine if the WU caused the computer to crash or the computer crashing caused the WU to fail.

---

Hi: Yea, about half the workunits failed on all the platforms. I'm looking into this now...

I'm 8.5hrs in to this symm fold dock relax task and still have not completed the second model. Seems significantly higher then the 1hr/model mentioned previously.

Looks like mine completed normally, but took just shy of 20hrs to complete 4 models.

---

Another compute error from my Mac G4/733: 2oo2A_BOINC_SYMM_FOLD_AND_DOCK_RELAX-2oo2A-dimer__2117_156, exit code 1 (0x1).

This WU failed after 4 seconds and apparently tried to access the internet (according to ZoneAlarm).

---

Yes, the failures do attempt to connect directly back to the project to report additional traces. And unfortunately with ZA, each version of Ralph AND Rosetta must be enabled. Please enable the current v5.68 by clicking the program control, and then the add button and selecting the .exe from your BOINC/projects folder

On Windows, the default path would be:
/Program Files/BOINC/Ralph.bakerlab.org/rosetta_beta_5.68_windows_intelx86

---