61)
Message boards :
RALPH@home bug list :
Rosetta Mini Beta 3.31
(Message 5538)
Posted 22 Jun 2012 by Conan Post: Is it? No, neither do I. But they are losing people over at Rosetta due to problems running the work units. Conan |
62)
Message boards :
RALPH@home bug list :
Rosetta Mini Beta 3.31
(Message 5536)
Posted 22 Jun 2012 by Conan Post: Is it? I haven't seen it on Ralph only on Rosetta. I don't think we even tested it, which is probably why they are getting so many errors over on Rosetta. We still test 3.26 here at Ralph, so I don't know what they are doing. Conan |
63)
Message boards :
RALPH@home bug list :
MiniRosetta Beta 3.26
(Message 5534)
Posted 14 Jun 2012 by Conan Post: On this Work Unit 2666791 I ran into this error <message> couldn't start Can't write init file: -108: -108 </message> Conan |
64)
Message boards :
RALPH@home bug list :
MiniRosetta Beta 3.26
(Message 5517)
Posted 6 Apr 2012 by Conan Post: The 6 Work Unit Limit is a bit of a pain.What 6 WU Limit? When you get a number of errors (as in quite a lot of them), the project limits how many work units you get so that a lot of work is not 'trashed'. However if the project sends out faulty work units you get the same result and then you are limited in how many work units, PER MACHINE, you can get. Myself and a number of others hit this limit on some of our computers, we could then only get 6 WUs for the whole day. Once a few successful WUs go through this limit gets lifted and then we can get as many as we can handle. Conan |
65)
Message boards :
RALPH@home bug list :
MiniRosetta Beta 3.26
(Message 5512)
Posted 5 Apr 2012 by Conan Post: The 6 Work Unit Limit is a bit of a pain. If the project sends out faulty work then I can't get any more for the day to test if some work units actually work or not. This will spread the work around I suppose but slow down getting the work returned. Conan |
66)
Message boards :
RALPH@home bug list :
MiniRosetta Beta 3.26
(Message 5511)
Posted 5 Apr 2012 by Conan Post: New Application. Not a very good one as nearly all work units are failing with various errors Some failed work units are as follows 2640054 2639860 2639851 2639832 Conan See also the Minirosetta beta 3.24 thread as I posted there as well |
67)
Message boards :
RALPH@home bug list :
RosettaMini Beta 3.24
(Message 5510)
Posted 5 Apr 2012 by Conan Post: The following Windows WUs failed with this error ERROR: [ERROR] Error opening symmetry file '/work/dimaio/projects/casp9/T0534/run_12/symmdef/3edvB_101_C2.symm' ERROR:: Exit from: ......srccoreconformationsymmetrySymmData.cc line: 535 BOINC:: Error reading and gzipping output datafile: default.out See 2639851 See 2639832 Conan |
68)
Message boards :
RALPH@home bug list :
RosettaMini Beta 3.24
(Message 5509)
Posted 5 Apr 2012 by Conan Post: This Wu failed with the following error ERROR: Option matching -score:pro_close_planar_constraint not found in command line top-level context See 2640115 Conan |
69)
Message boards :
RALPH@home bug list :
RosettaMini Beta 3.24
(Message 5508)
Posted 5 Apr 2012 by Conan Post: All work units today on my Linux machines are producing this error (also a few Windows ones as well) ERROR: Fatal Error in VDW_Energy ERROR:: Exit from: src/core/scoring/methods/VDW_Energy.cc line: 169 BOINC:: Error reading and gzipping output datafile: default.out See 2640046 See 2640032 See 2640056 See 2639860(Win) Conan |
70)
Message boards :
RALPH@home bug list :
RosettaMini Beta 3.24
(Message 5499)
Posted 1 Apr 2012 by Conan Post: Well out of dozens of failures I managed to have just the ONE SUCCESS 2633954 is successful Conan |
71)
Message boards :
RALPH@home bug list :
RosettaMini Beta 3.24
(Message 5490)
Posted 31 Mar 2012 by Conan Post: All errors on win 7 (32 and 64 bit): Same Error on Linux 64 bit, ALL work units Error out. ERROR: in::file::boinc_wu_zip design_62_data.zip does not exist! ERROR:: Exit from: src/apps/public/boinc/minirosetta.cc line: 162 BOINC:: Error reading and gzipping output datafile: default.out called boinc_finish See the following Work Units 2626834 2626869 2626908 2626909 2626975 2627013 2627086 Conan |
72)
Message boards :
RALPH@home bug list :
RosettaMini Beta 3.24
(Message 5479)
Posted 15 Mar 2012 by Conan Post: Had an error on this one2614017 Process exited with code 193 (0xc1, -63) SIGSEGV: segmentation violation Stack trace (18 frames): [0xa858057] [0xf771b400] [0xa55e7bf] [0x9b30785] [0x9b16cff] [0x9b1db00] [0x9d24392] [0x9bd61a9] [0x8a84a27] [0x8a3a683] [0x93c09a0] [0x93c336a] [0x954a627] [0x95b06f5] [0x95adf25] [0x80547ed] [0xa8e7f78] [0x8048131] Conan |
73)
Message boards :
RALPH@home bug list :
Rosetta@Home Version 3.23
(Message 5471)
Posted 9 Mar 2012 by Conan Post: Had this error on a 6 hour preference, it was completed by another volunteer with a much shorter runtime preference See 2607010 ERROR: Fatal SOGFunc_Impl error. ERROR:: Exit from: ......srccorescoringconstraintsSOGFunc_Impl.cc line: 181 BOINC:: Error reading and gzipping output datafile: default.out Conan |
74)
Message boards :
RALPH@home bug list :
Rosetta mini beta 3.22
(Message 5470)
Posted 9 Mar 2012 by Conan Post: Had a Validate Error on this one, could not see any reason why as no error was evident See 2607770 Conan |
75)
Message boards :
RALPH@home bug list :
Rosetta mini beta 3.22
(Message 5466)
Posted 1 Mar 2012 by Conan Post: Had this error today - Unhandled Exception Record - Reason: Access Violation (0xc0000005) at address 0x0081B90D read attempt to address 0xDB4890AF On This WU Conan |
76)
Message boards :
RALPH@home bug list :
Rosetta mini beta 3.22
(Message 5465)
Posted 24 Feb 2012 by Conan Post: Had this one 2559243 with this error ERROR: total_residue() != 0 ERROR:: Exit from: ......srccoreposePose.cc line: 990 BOINC:: Error reading and gzipping output datafile: default.out Conan |
77)
Message boards :
RALPH@home bug list :
Rosetta mini beta 3.22
(Message 5464)
Posted 23 Feb 2012 by Conan Post: Had This One running for 9 hours 57 minutes on a 6 hour preference before I aborted it. It had gotten to 55.474% and then stopped, the CPU Runtime was ticking over but the CPU was not doing anything, the core was being held for use but was not being used. Conan |
78)
Message boards :
RALPH@home bug list :
Rosetta mini beta 3.22
(Message 5463)
Posted 22 Feb 2012 by Conan Post: Getting the same message on Win 32 bit and Linux 64 bit ERROR: Cannot open PDB file "workstrauchssjdenovofold-1i2tfoldrefold_designsbatch1pdbsLF.20.design.pdb.gz" ERROR:: Exit from: ......srccoreimport_poseimport_pose.cc line: 184 BOINC:: Error reading and gzipping output datafile: default.out On Win Result And Linux Result Conan |
79)
Message boards :
RALPH@home bug list :
Rosetta Mini Beta 3.19
(Message 5461)
Posted 12 Feb 2012 by Conan Post: Every Work Unit I ran on my Linux machines ran for over 8 to 9 hours on a 6 hour preference. Reported time was 6 hours. Where is the other 3 hours? Windows ran for the reported time. Seems a bit strange. Conan |
80)
Message boards :
Number crunching :
Milestones
(Message 5453)
Posted 2 Feb 2012 by Conan Post: About time, I have made 900,000 Cobblestones on RALPH. It has taken many a year to get this high. Almost 4 years to the day since I reported getting to 300,000 cobblestones, no longer number one in the world as I was then but still hanging in the top 10. Conan |
©2024 University of Washington
http://www.bakerlab.org