Umm, 5.0 or 5.01?

Message boards : RALPH@home bug list : Umm, 5.0 or 5.01?

To post messages, you must log in.

AuthorMessage
Nuadormrac
Avatar

Send message
Joined: 22 Feb 06
Posts: 68
Credit: 11,362
RAC: 0
Message 1236 - Posted: 19 Apr 2006, 3:14:10 UTC

I ask because a thread was created to report bugs with 5.01 WUs... However, connecting to the RALPH servers, 5.0 WUs were just downloaded to my comp, not 5.01?

Is anyone getting 5.01 WUs, or is there a mix of both versions on the servers, or hmm?
ID: 1236 · Report as offensive    Reply Quote
Moderator9
Volunteer moderator

Send message
Joined: 16 Feb 06
Posts: 251
Credit: 0
RAC: 0
Message 1237 - Posted: 19 Apr 2006, 3:19:43 UTC - in response to Message 1236.  

I ask because a thread was created to report bugs with 5.01 WUs... However, connecting to the RALPH servers, 5.0 WUs were just downloaded to my comp, not 5.01?

Is anyone getting 5.01 WUs, or is there a mix of both versions on the servers, or hmm?



Well the server application page says "5.01" But there may be a short lag time before the new work units float to the surface.

Moderator9
RALPH@home FAQs
RALPH@home Guidelines
Moderator Contact
ID: 1237 · Report as offensive    Reply Quote
Yeti
Avatar

Send message
Joined: 19 Feb 06
Posts: 32
Credit: 316,371
RAC: 853
Message 1238 - Posted: 19 Apr 2006, 11:03:40 UTC

Shuold we abort 5.00 WUs ?

Just discovered, that a lot of this 5.00 WUs crashed and wanted to post info as i saw 5.01 ...




Supporting BOINC, a great concept !
ID: 1238 · Report as offensive    Reply Quote
Moderator9
Volunteer moderator

Send message
Joined: 16 Feb 06
Posts: 251
Credit: 0
RAC: 0
Message 1240 - Posted: 19 Apr 2006, 13:36:11 UTC - in response to Message 1238.  

Shuold we abort 5.00 WUs ?

Just discovered, that a lot of this 5.00 WUs crashed and wanted to post info as i saw 5.01 ...


I have no guidance yet on aborting Version 5.0 Work Units. I suspect from what I am seeing that version 5.01 is already out there, but that someone forgot to change the names and output messages to reflect the new number. I will see what I can find out, and either get back to you myself or get D. Kim to post something.
Moderator9
RALPH@home FAQs
RALPH@home Guidelines
Moderator Contact
ID: 1240 · Report as offensive    Reply Quote
Profile Carlos_Pfitzner
Avatar

Send message
Joined: 16 Feb 06
Posts: 182
Credit: 22,792
RAC: 0
Message 1241 - Posted: 19 Apr 2006, 13:43:44 UTC - in response to Message 1238.  
Last modified: 19 Apr 2006, 14:03:10 UTC

Shuold we abort 5.00 WUs ?

Just discovered, that a lot of this 5.00 WUs crashed and wanted to post info as i saw 5.01 ...



Humm 5.00 was good enough for me ...
u may finish them to not lose the credits of that ones partially crunched,
however I will abort all my 5.00 WUs that did not started crunching yet,
so, I can start testing the new version 5.01 asap !

ps: Why u did not reported that 5.00 crashed into the 5.00 bugs thread ?
with a link to each result. this way-> [url] url-of-the-crashed-result [/url]

Anyway, would be nice Installing the debugger -or- at least upgrading u boinc
https://ralph.bakerlab.org/forum_thread.php?id=166
*Read all thread
Click signature for global team stats
ID: 1241 · Report as offensive    Reply Quote
Yeti
Avatar

Send message
Joined: 19 Feb 06
Posts: 32
Credit: 316,371
RAC: 853
Message 1242 - Posted: 19 Apr 2006, 13:44:19 UTC

HM, only to your info: If they only forgot to change the vers-number, it looks not really good. I saw several WUs crashing, similar like this:

https://ralph.bakerlab.org/workunit.php?wuid=81221

My hosts run cc 5.4.3, but it seems not to have to do with the cc, as I saw in result-files from other users 5.2.13 ...



Supporting BOINC, a great concept !
ID: 1242 · Report as offensive    Reply Quote
Yeti
Avatar

Send message
Joined: 19 Feb 06
Posts: 32
Credit: 316,371
RAC: 853
Message 1243 - Posted: 19 Apr 2006, 13:50:50 UTC - in response to Message 1241.  

Humm 5.00 was good enough for me ...
u may finish them to not lose the credits of that ones partially crunched,
however I will abort all my 5.00 WUs that did not started crunching yet,
so, I can start testing the new version 5.01 asap !

ps: Why u did not reported that 5.00 crashed into the 5.00 bugs thread ?
with a link to each result. this way-> http://url-of-the-crashed-result

Anyway, would be nice Installing the debugger -or- at least upgrading u boinc
[url] https://ralph.bakerlab.org/forum_thread.php?id=166[/url]
*Reead all thread


Carlos, I was on the way to post the errors in 5.00-thread.

But, I run a cache of 0 (!) days and saw, that 5.01 seemed to be out for several hours. So, I expected to see my clients crunch with 5.01 and checked them again, seeing they got fresh 5.00 ...

Sorry, that I didn't upgrade my clients from 5.4.3 to 5.4.4, but since 5.4.4 was announced, I didn't have the time to upgrade :-(

Regarding your post with debugger: I read your post about it, but found it sound very complicated ...



Supporting BOINC, a great concept !
ID: 1243 · Report as offensive    Reply Quote
Profile Carlos_Pfitzner
Avatar

Send message
Joined: 16 Feb 06
Posts: 182
Credit: 22,792
RAC: 0
Message 1244 - Posted: 19 Apr 2006, 14:09:32 UTC - in response to Message 1242.  

HM, only to your info: If they only forgot to change the vers-number, it looks not really good. I saw several WUs crashing, similar like this:

https://ralph.bakerlab.org/workunit.php?wuid=81221

My hosts run cc 5.4.3, but it seems not to have to do with the cc, as I saw in result-files from other users 5.2.13 ...


Yep! all results of u WU are indded 5.00
https://ralph.bakerlab.org/workunit.php?wuid=81221

I suppose this one was yours.
https://ralph.bakerlab.org/result.php?resultid=90131

Cheers
ID: 1244 · Report as offensive    Reply Quote
Yeti
Avatar

Send message
Joined: 19 Feb 06
Posts: 32
Credit: 316,371
RAC: 853
Message 1245 - Posted: 19 Apr 2006, 14:13:19 UTC - in response to Message 1244.  

I suppose this one was yours.
https://ralph.bakerlab.org/result.php?resultid=90131

Cheers

You are right ;-)

Cheers


Supporting BOINC, a great concept !
ID: 1245 · Report as offensive    Reply Quote
Profile Carlos_Pfitzner
Avatar

Send message
Joined: 16 Feb 06
Posts: 182
Credit: 22,792
RAC: 0
Message 1246 - Posted: 19 Apr 2006, 14:25:11 UTC - in response to Message 1243.  

Humm 5.00 was good enough for me ...
u may finish them to not lose the credits of that ones partially crunched,
however I will abort all my 5.00 WUs that did not started crunching yet,
so, I can start testing the new version 5.01 asap !

ps: Why u did not reported that 5.00 crashed into the 5.00 bugs thread ?
with a link to each result. this way-> http://url-of-the-crashed-result

Anyway, would be nice Installing the debugger -or- at least upgrading u boinc
[url] https://ralph.bakerlab.org/forum_thread.php?id=166[/url]
*Reead all thread


Carlos, I was on the way to post the errors in 5.00-thread.

But, I run a cache of 0 (!) days and saw, that 5.01 seemed to be out for several hours. So, I expected to see my clients crunch with 5.01 and checked them again, seeing they got fresh 5.00 ...

Sorry, that I didn't upgrade my clients from 5.4.3 to 5.4.4, but since 5.4.4 was announced, I didn't have the time to upgrade :-(

Regarding your post with debugger: I read your post about it, but found it sound very complicated ...


Then, I need to simplify.
Upgrade to latest boinc 5.4.x
http://boinc.berkeley.edu/download.php?min_version=5.0&dev=1
-or-
donwnload this debugger - about 13 MB
http://msdl.microsoft.com/download/symbols/debuggers/dbg_x86_6.5.3.8.exe
Install it
*after installation,
copy from installation Folder all dll and all yes to u boinc folder
copy *.dll x:boinc_folder
copy *.yes x:boinc_folder
u are done

ps: together with the debugger
comes
tlist.exe
kill.exe
that can be used on cmd prompt to list all running process
and if u want to kill some u may enter kill nnnn where nnnn is the process nbr

Click signature for global team stats
ID: 1246 · Report as offensive    Reply Quote
Profile Carlos_Pfitzner
Avatar

Send message
Joined: 16 Feb 06
Posts: 182
Credit: 22,792
RAC: 0
Message 1247 - Posted: 19 Apr 2006, 14:34:52 UTC

But, I run a cache of 0 (!) days and saw, that 5.01 seemed to be out for several hours. So, I expected to see my clients crunch with 5.01 and checked them again, seeing they got fresh 5.00 ...


A project reset should force the new version 5.01 be downloaded
Click signature for global team stats
ID: 1247 · Report as offensive    Reply Quote
Yeti
Avatar

Send message
Joined: 19 Feb 06
Posts: 32
Credit: 316,371
RAC: 853
Message 1248 - Posted: 19 Apr 2006, 14:41:00 UTC
Last modified: 19 Apr 2006, 14:41:31 UTC

Having to do this on more than 20 boxes sounds like a lot of work ...

What about the pdb-files for the boinc-components ? Rom had posted that with 5.4.x it should happen automatic, but told me, that he didn't get it work until 5.4.3 ... Using the ms-debugger, would it be necessary to download and deploy pdb-files or is it obsolet then ?

Regarding your suggestion for a projekt-reset: I don't think it is really necessary, normally the clients pickup the new client-versions together with new WUs; so, why do you think a projekt-reset is necassary ?



Supporting BOINC, a great concept !
ID: 1248 · Report as offensive    Reply Quote
Moderator9
Volunteer moderator

Send message
Joined: 16 Feb 06
Posts: 251
Credit: 0
RAC: 0
Message 1256 - Posted: 19 Apr 2006, 18:50:52 UTC - in response to Message 1248.  

Having to do this on more than 20 boxes sounds like a lot of work ...

What about the pdb-files for the boinc-components ? Rom had posted that with 5.4.x it should happen automatic, but told me, that he didn't get it work until 5.4.3 ... Using the ms-debugger, would it be necessary to download and deploy pdb-files or is it obsolet then ?

Regarding your suggestion for a projekt-reset: I don't think it is really necessary, normally the clients pickup the new client-versions together with new WUs; so, why do you think a projekt-reset is necassary ?


Hold off on resetting. I have contacted the project to find out what is going on with the version number and what is being tested. Either they will tell me and I will post what I find out or they will post directly. In any case we should have an answer very soon.

Please stand by.

Moderator9
RALPH@home FAQs
RALPH@home Guidelines
Moderator Contact
ID: 1256 · Report as offensive    Reply Quote
Yeti
Avatar

Send message
Joined: 19 Feb 06
Posts: 32
Credit: 316,371
RAC: 853
Message 1258 - Posted: 19 Apr 2006, 20:26:49 UTC

@Carlos

meanwhile they have stopped sending out WUs ...

I used the time to update most clients to 5.4.4 ...

@Moderator9

there have to happen really crazy things before I would reset a project ...

Let's see, what the next turnaround will bring for surprizes ;-)


Supporting BOINC, a great concept !
ID: 1258 · Report as offensive    Reply Quote
Profile Carlos_Pfitzner
Avatar

Send message
Joined: 16 Feb 06
Posts: 182
Credit: 22,792
RAC: 0
Message 1262 - Posted: 19 Apr 2006, 22:46:33 UTC

Yeti


Ich fand Sie hat keine Mannschaft...

Verbindungslinie FaDBeens

Besuchen Sie FaDBeens Forum - Ich schlug meine Pläne an, eine 2 teraflops Arbeitsfläche zu bauen

Dank
Click signature for global team stats
ID: 1262 · Report as offensive    Reply Quote
Yeti
Avatar

Send message
Joined: 19 Feb 06
Posts: 32
Credit: 316,371
RAC: 853
Message 1271 - Posted: 20 Apr 2006, 7:12:11 UTC

Carlos,

thnak you for your invitation and for trying this in German :-)

Sorry, I am a member of a big german team called Nordlichter.

Or take a look here.

We didn't create this team at RALPH until now


Supporting BOINC, a great concept !
ID: 1271 · Report as offensive    Reply Quote

Message boards : RALPH@home bug list : Umm, 5.0 or 5.01?



©2024 University of Washington
http://www.bakerlab.org