Error -WARNING! attempt to gzip file .xxt299.out failed: file does not exist.
on this wu https://ralph.bakerlab.org/result.php?resultid=191298

Same error on this result: https://ralph.bakerlab.org/result.php?resultid=192118. It also happened to the other user who crunched this WU: https://ralph.bakerlab.org/result.php?resultid=191496.

---

Rosetta_beta 5.24 Linux

WARNING! attempt to gzip file ./xxt299.out failed: file does not exist.

https://ralph.bakerlab.org/result.php?resultid=192080

---

Click signature for global team stats

Phantom WU
https://ralph.bakerlab.org/result.php?resultid=189881

I dont have this WU on this pc to crunch !

Thanks

---

Click signature for global team stats

We tried the "continuous work for ralph" for a week or so, but our turnaround time for testing new WUs was just too slow! It would take about 24 hours for computers to free up, accept new WUs, and give back initial results -- we want the tunaround time to be less than 12 hours. Hope that's a reasonable explanation!

My advice is to crunch for both rosetta@home and ralph, if you haven't already... the good news is that we're setting up the debugging stuff over on rosetta@home, so we'll be hopefully be getting a steady stream of callstacks from whatever errors are going on over there too!

id love to run 5.24, but i am getting "no work from project".
i thought there was supposed to be work available at any time now? :)
server status page is all green, it only shows no WUs ready to send.

I make a new host, venue school , connect to network every second , running *only* ralph@home

*This one should download only 1 job at a time, crunch and upload, report
and then download the next -:) and on and on

However my WUs are failing on them !

May be a host setup problem ?
-or- just bad WUs ?

Exit status -1073741684 (0xffffffffc000008c)
https://ralph.bakerlab.org/result.php?resultid=190094
https://ralph.bakerlab.org/result.php?resultid=190240
https://ralph.bakerlab.org/result.php?resultid=190262

any help appreciated -> this host owns a virtual CPU
and had crunched simap and einstein , with no problems -:)

my host specs
Average upload rate 0.53 KB/sec
Average download rate 9.59 KB/sec
Average turnaround time 0 days

Also was able to meet TANPAKU deadline of 1 hour

Thanks

Found the problem, and fixed it. was a corrupted NTFS virtual FileSystem

Now the problem is another

Outcome Client error
Client state Downloading
Exit status -186 (0xffffffffffffff46


I looked at the download progress,
and before all files of the WU has finished downloading,
the job started to run, and imediatelly got this error.
https://ralph.bakerlab.org/result.php?resultid=190486

I am believing on a ralph server problem, or my ISP had some glitch with my Link
Anyway the job (WU) should not start to run before all files downloaded

Now,
I'll wait there is work again ... Xlab (backup project)
is downloading / crunching / uploading 100% OK ;)

I select Xlab to "backup project" cause their WUs crunch in 9 minutes
so, when there is work, immediattely the vpc switch to ralph.

Thanks

Finally I got my host working properly. (in reallity I setup two hosts
to have a fast turnaroud -> One Linux and another Windows

These are my turnaroud times
1) Linux
Average turnaround time 0.07 days
*By now 14 Jobs sucessfull under this turnaroud.
->thanks fast Internet Link 2gbit
2) Windows
Average turnaround time 0.2 days
*By now 5 sucessfull jobs under this turnaroud.
No thanks to my dialup speed 28800 bps

Everyone wanting to to get a fast turnaround too do the following.

1) Must have a permanent -or- quasi permanent Internet connection
eg: a Dialup conneted 24/hours by day.

2) using a unused venue. eg: school
setup the following:
Leave applications in memory while preempted? yes
Switch between applications every 17 minutes
Write to disk at most every 14 seconds
Connect to network about every 0.0000100 days

3) Assign that venue to a pc with > 500 mhz
and attach that pc to ralph@home

4) On ralph preferences
Target CPU run time 1 hour

*cause ralph@home does not ever has work to crunch
Attach a second project too, to that pc
This second project must have(fast WUs) that is: less than a half hour to crunch

*Suitable projects to use as a second project, (that I know, by now)
XtremLab,
Leiden Classic,
Hash Clash,
Prime Grid,
Tanpaku.

And enjoy a ralph@home turnaround time of less than 12 hours -:)

ps: dont forget to join my team (on ralph@home)
https://ralph.bakerlab.org/team_join_form.php?id=52

Thanks

---

Click signature for global team stats

Rosetta_beta_5.24 Linux

WARNING! attempt to gzip file ./xxt299.out failed: file does not exist
https://ralph.bakerlab.org/result.php?resultid=192840

24-06-2006 13:20:42||Starting BOINC client version 5.4.9 for windows_intelx86
24-06-2006 13:20:42||libcurl/7.15.3 OpenSSL/0.9.8a zlib/1.2.3
24-06-2006 13:20:42||Data directory: C:Program FilesBOINC
24-06-2006 13:20:42||Processor: 1 GenuineIntel Intel(R) Pentium(R) M processor 1.73GHz
24-06-2006 13:20:42||Memory: 502.42 MB physical, 1.20 GB virtual
24-06-2006 13:20:42||Disk: 55.88 GB total, 16.94 GB free
24-06-2006 13:20:42|rosetta@home|URL: https://boinc.bakerlab.org/rosetta/; Computer ID: 165598; location: ; project prefs: default
24-06-2006 13:20:42|ralph@home|URL: https://ralph.bakerlab.org/; Computer ID: 1597; location: ; project prefs: default
24-06-2006 13:20:42||General prefs: from rosetta@home (last modified 2006-03-30 08:46:27)
24-06-2006 13:20:42||General prefs: using your defaults
24-06-2006 13:20:42||Local control only allowed
24-06-2006 13:20:42||Listening on port 31416

[...]

25-06-2006 11:15:37|ralph@home|Computation for task t299__CASP7_ABRELAX_SAVE_ALL_OUT_hom001__NT5_CT1_762_10_2 finished
25-06-2006 11:15:38|ralph@home|Unrecoverable error for result t299__CASP7_ABRELAX_SAVE_ALL_OUT_hom001__NT5_CT1_762_10_2 (<file_xfer_error> <file_name>t299__CASP7_ABRELAX_SAVE_ALL_OUT_hom001__NT5_CT1_762_10_2_0</file_name> <error_code>-161</error_code></file_xfer_error>)

running 71,43% rosetta and 28,57% RALPH, not sure if it has any effect

Result:https://ralph.bakerlab.org/result.php?resultid=195882

---

25.06.2006 23:24:26|ralph@home|Unrecoverable error for result t330__CASP7_ABRELAX_SAVE_ALL_OUT_ncap_hom002__776_50_0 (Unzulässige Funktion. (0x1) - exit code 1 (0x1))


Result

---

Resultid 195909
Resultid 195910

WARNING! attempt to gzip file .xxt299.out failed: file does not exist.
26/06/2006 7:43:58 PM|ralph@home|Unrecoverable error for result t299__CASP7_ABRELAX_SAVE_ALL_OUT_hom001__NT5_CT4_762_10_1 (<file_xfer_error> <file_name>t299__CASP7_ABRELAX_SAVE_ALL_OUT_hom001__NT5_CT4_762_10_1_0</file_name> <error_code>-161</error_code> <error_message></error_message></file_xfer_error>)