computation error with this one 914384

2tif__BOINC_GEOSOL_ABRELAX-2tif_-_3497_12

This one failed after less than 30 seconds runtime. Detailed error message in Boinc log from my pc:

Output file 1dcj__BOINC_GEOSOL_ABRELAX-1dcj_-_3497_16_0_0 for task 1dcj__BOINC_GEOSOL_ABRELAX-1dcj_-_3497_16_0 absent

Task ID 914507
Name 1dcj__BOINC_GEOSOL_ABRELAX-1dcj_-_3497_16_0
Workunit 816303
Server state Over
Outcome Client error
Client state Compute error
Exit status -1073741819 (0xffffffffc0000005)
Computer ID 12756
time 29.92188
stderr out

<core_client_version>6.1.0</core_client_version>
<![CDATA[
<message>
- exit code -1073741819 (0xc0000005)
</message>
<stderr_txt>
# cpu_run_time_pref: 7200


Unhandled Exception Detected...

- Unhandled Exception Record -
Reason: Access Violation (0xc0000005) at address 0x00737A21 read attempt to address 0x8C73158C

Engaging BOINC Windows Runtime Debugger...
********************

---

Another to add to the pile.

915312

Dr. Who's Tardis beat me by 9 seconds!

I keep on getting task freezes using Mini-Rosetta 1.11 but not all the time.
The last problem task (1bq9A_BOINC_ABINITIO_IGNORE_THE_REST-S25-14-S3-4--1bq9A-_3476_2_1) was started on the 15/04/2008 at 01:16:38, and was going for over eight hours without any increase in the percentage complete column – that is it stayed at zero.
This failure type has occurred several times now, after which I either aborted the task or reset the project, but obviously to no avail as the problem keeps on occurring.
By the way, the Mini-Rosetta application, in such a situation, does not always relinquish the task after its allotted time but keeps on going ad nauseam, so stopping tasks from other communities, or Rosetta, from starting.

---

Another two time failure 1r69__BOINC_GEOSOL_ABRELAX-1r69_-_3497_1 Same error messages
From my log file:

|ralph@home|Output file 1r69__BOINC_GEOSOL_ABRELAX-1r69_-_3497_1_1_0 for task 1r69__BOINC_GEOSOL_ABRELAX-1r69_-_3497_1_1 absent


I also had another 1n0u__BOINC_GESOL_LKSOL_MIX_ABRELAX-1n0u_-_3497_19 which my ppc mac handled just fine but the first attempt, by an intel machine running windows XP, crashed within a few seconds of starting.

Task ID 916632
Name 1ogw__BOINC_GESOL_LKSOL_MIX_ABRELAX-1ogw_-_3497_16_1
Workunit 816320
Created 15 Apr 2008 14:33:18 UTC
Sent 15 Apr 2008 14:54:20 UTC
Received 16 Apr 2008 14:26:58 UTC
Server state Over
Outcome Client error
Client state Compute error
Exit status -1073741819 (0xffffffffc0000005)
Computer ID 12421
Report deadline 19 Apr 2008 14:54:20 UTC
CPU time 20.89063
stderr out <core_client_version>5.10.45</core_client_version>
<![CDATA[
<message>
- exit code -1073741819 (0xc0000005)
</message>
<stderr_txt>
# cpu_run_time_pref: 3600


Unhandled Exception Detected...

- Unhandled Exception Record -
Reason: Access Violation (0xc0000005) at address 0x00737A21 read attempt to address 0x3DF64458

Engaging BOINC Windows Runtime Debugger...



********************



Mine was second failure for this task.

Task ID 916636
Name 1r69__BOINC_GESOL_LKSOL_MIX_ABRELAX-1r69_-_3497_14_1
Workunit 816255
Created 15 Apr 2008 14:46:25 UTC
Sent 15 Apr 2008 14:54:20 UTC
Received 16 Apr 2008 20:50:15 UTC
Server state Over
Outcome Client error
Client state Compute error
Exit status -1073741819 (0xffffffffc0000005)
Computer ID 12421
Report deadline 19 Apr 2008 14:54:20 UTC
CPU time 18.5625
stderr out <core_client_version>5.10.45</core_client_version>
<![CDATA[
<message>
- exit code -1073741819 (0xc0000005)
</message>
<stderr_txt>
# cpu_run_time_pref: 3600


Unhandled Exception Detected...

- Unhandled Exception Record -
Reason: Access Violation (0xc0000005) at address 0x00737A21 read attempt to address 0x3DF64460

Engaging BOINC Windows Runtime Debugger...



********************
second failure on this task.

1ogw__BOINC_GEOSOL_ABRELAX-1ogw_-_3497_18_2

<core_client_version>5.10.45</core_client_version>
<![CDATA[
<message>
- exit code -1073741819 (0xc0000005)
</message>
<stderr_txt>
# cpu_run_time_pref: 3600


Unhandled Exception Detected...

- Unhandled Exception Record -
Reason: Access Violation (0xc0000005) at address 0x00737A21 read attempt to address 0x3DF64398

Engaging BOINC Windows Runtime Debugger...

1di2__BOINC_GESOL_LKSOL_MIX_ABRELAX-1di2_-_3497_17_0

<core_client_version>5.10.45</core_client_version>
<![CDATA[
<message>
- exit code -1073741819 (0xc0000005)
</message>
<stderr_txt>
# cpu_run_time_pref: 3600


Unhandled Exception Detected...

- Unhandled Exception Record -
Reason: Access Violation (0xc0000005) at address 0x00737A21 read attempt to address 0x3DF64428

Engaging BOINC Windows Runtime Debugger...


2reb__BOINC_GEOSOL_ABRELAX-2reb_-_3497_17_0


<core_client_version>5.10.45</core_client_version>
<![CDATA[
<message>
- exit code -1073741819 (0xc0000005)
</message>
<stderr_txt>
# cpu_run_time_pref: 3600


Unhandled Exception Detected...

- Unhandled Exception Record -
Reason: Access Violation (0xc0000005) at address 0x00737A21 read attempt to address 0x3DF6439C

Engaging BOINC Windows Runtime Debugger...

---

I got the following error message

<core_client_version>5.10.45</core_client_version>
<![CDATA[
<message>
Felaktig funktion. (0x1) - exit code 1 (0x1)
</message>
<stderr_txt>

ERROR: Cannot open file 1vie.pdb
ERROR:: Exit from: ....srccoreiopdbpose_io.cc line: 157
called boinc_finish

</stderr_txt>
]]>

on workunit
927267 924073 923601





Errormessage
<core_client_version>5.10.45</core_client_version>
<![CDATA[
<message>
Felaktig funktion. (0x1) - exit code 1 (0x1)
</message>
<stderr_txt>
# cpu_run_time_pref: 3600
ERROR:: Unable to obtain total_residue & sequence.
start pdb file must be provided.
ERROR:: Exit from: .input_pdb.cc line: 2970

</stderr_txt>
]]>

on workunits

927244 927366 927227





Validation errors on workunits

922986 920987 920977 920975 920948 920943 920940 920937 920914 920910


And a really long and strange error message on workunit
919854

Result
Host

<core_client_version>5.10.21</core_client_version>
<![CDATA[
<message>
process exited with code 1 (0x1, -255)
</message>
<stderr_txt>
Graphics are disabled due to configuration...
# cpu_run_time_pref: 7200
ERROR:: Unable to obtain total_residue & sequence.
start pdb file must be provided.
ERROR:: Exit from: input_pdb.cc line: 2970

</stderr_txt>
]]>



2008-04-21 06:10:29 [ralph@home] Starting task BAK1k9k_Abrlx_3517_50_0 using rosetta_beta version 596
2008-04-21 06:10:31 [ralph@home] Reason: Unrecoverable error for result BAK1k9k_Abrlx_3517_50_0 (process exited with code 1 (0x1, -255))
2008-04-21 06:10:31 [ralph@home] Computation for task BAK1k9k_Abrlx_3517_50_0 finished
2008-04-21 06:10:31 [ralph@home] Output file BAK1k9k_Abrlx_3517_50_0_0 for task BAK1k9k_Abrlx_3517_50_0 absent

---

Kathryn :o)
The BOINC FAQ Service
The Unofficial BOINC Wiki
The Trac System
More BOINC information than you can shake a stick of RAM at.

I second that on work unit 927276.

However my error message stated:

Incorrect function. (0x1) - exit code 1 (0x1)
</message>
<stderr_txt>
# cpu_run_time_pref: 3600
ERROR:: Unable to obtain total_residue & sequence.
start pdb file must be provided.
ERROR:: Exit from: .input_pdb.cc line: 2970

Had this error message yesterday:

Task ID 941583
Name sol5__BOINC_SYMM_FOLD_AND_DOCK_RELAX_ONLY-sol5_-lowres_dock_-dock_1452__3547_1_0
Workunit 835975
Created 1 May 2008 3:58:35 UTC
Sent 1 May 2008 4:00:26 UTC Received 1 May 2008 5:45:15 UTC
Server state Over. Outcome Client error. Client state Compute error.
Exit status -185 (0xffffffffffffff47)
Computer ID 12413 Report deadline 5 May 2008 4:00:26 UTC
CPU time 0
stderr out <core_client_version>5.10.45</core_client_version>
<![CDATA[
<message>
Can't link input file
</message>
]]>
Validate state Invalid
Claimed credit 0 Granted credit 0 application version 5.96

Have a nice day,
Path7.

Had these two fail with the same error after 14 seconds,
This WU
and this WU

<core_client_version>5.10.45</core_client_version>
<![CDATA[
<message>
process exited with code 1 (0x1, -255)
</message>
<stderr_txt>
Graphics are disabled due to configuration...
# cpu_run_time_pref: 21600
# random seed: 1381311
ERROR:: Exit from: loop_relax.cc line: 1745

---

Had these two fail with the same error after 14 seconds,
This WU
and this WU

<core_client_version>5.10.45</core_client_version>
<![CDATA[
<message>
process exited with code 1 (0x1, -255)
</message>
<stderr_txt>
Graphics are disabled due to configuration...
# cpu_run_time_pref: 21600
# random seed: 1381311
ERROR:: Exit from: loop_relax.cc line: 1745

Same error here in resultid=949856 and resultid=949857

Another loop error exit:
ERROR:: Exit from: .loop_relax.cc line: 1745

I was the wingman. Both computers kicked this one out in less than 40 seconds.

---

RALPH and Rosie sittin' in a tree,
F - O - L - D - I - N - G!

Got a bunch of v5.96 wu's going down with:

'ERROR:: Unable to determine sequence length from pdb file'

and

'</stderr_txt>
<message>
<file_xfer_error>
<file_name>BAK1lcj_loop_model_dssp_it05_3696_4_1_0</file_name>
<error_code>-161</error_code>
</file_xfer_error>

</message'

for example:

955147

add another 3 to the list with the same problem.
They had previously failed on another machine also.
957116
957115
957114

A couple of winning 5.96 wu's, 24hr runtime with no spurious messages:

956480

and

956484

Don't know if it's a problem with my computer or WU, but this WU doesn't have any moving graphics, only native form is visible.

I just had a v5.96 task, t397__CASP8_JUMPAB_SAMPLE2_res1to79_SAVE_ALL_OUT_BARCODE_hom001__3906_12_0, crash on my Mac G5, error code -161, exit status 0x0. BOINC Manager had become unresponsive on failing to get an Internet connection (I think my ISP were tinkering with their servers); after I force-quit it there were still two rosetta_beta threads showing in Activity Manager.