All wus without problems (up to now)
I'm crunching also a wu on my smartphone...

I'm crunching also a wu on my smartphone...

Wu at 11% of computation restarts from 0%. This happens 3 times...at the end i kill this wu.
This. It's a problem of disk space? Ram?

CPU type ARM
ARMv7 Processor rev 2 (v7l)
Number of CPUs 1
Operating System Android 2.6.35.7-1206759
Memory 350.68 MB
Cache -0 KB
Swap space 0 MB
Total disk space 1.07 GB
Free Disk Space 0.5 GB
Measured floating point speed 460.08 million ops/sec
Measured integer speed 1517.74 million ops/sec

Yeah, those WUs seem to have a fairly large (low) restart threshold. Got two jobs on my laptop, running for about an hour and when I restarted my laptop today, they both started at 0% again. Theoretically they should finish before I have to leave and hit the road again, hope that they don't start all over again when I get back.

Ralf

Strange behaviour of the last set of (4) WUs. They are running now for a bit more than 2h, showing around 24% done but only a few odd minutes of elapsed runtime, and only a few (23) seconds of CPU time and supposedly no checkpoint reached yet... :?
Running on Windows 8.1/64, with 6GB of RAM and not much else going on on the machine right now...

Anyone there and care to explain?

Ralf

recent 8 tasks on 3.52 completed without errors.
i did a project reset and aborted the next set of tasks (as the 'old' binaries for 3.52 gets downloaded again), note it's not due to any errors.

should my client download 3.53 beta rather than 3.52 as it seemed both versions appear in apps?
https://ralph.bakerlab.org/apps.php

it seemed that the current set of tasks downloads the associated 3.52 binary rather than 3.53

ok, the 4 WUs that I got have by now repeatedly restarted from scratch, even at though at one point showing almost 30% done.
And I noticed that those WUs are trashing the hard drive like crazy...

Ralf

ok, the 4 WUs that I got have by now repeatedly restarted from scratch, even at though at one point showing almost 30% done.

Same here on my notebook, restart and restart and restart....

ok i found the app files at https://ralph.bakerlab.org/download/

as it turns out on ralph 3.52 and 3.53 beta seemed to be the same files

md5 sum                           app
dcb06f5cf47637f6af2759a40c5b0cdb  minirosetta_3.52_x86_64-pc-linux-gnu
dcb06f5cf47637f6af2759a40c5b0cdb  minirosetta_beta_3.53_x86_64-pc-linux-gnu

and this same version (supposedly beta) is apparently running in 'production' rosetta@home

md5 sum                           app
dcb06f5cf47637f6af2759a40c5b0cdb  ../boinc.bakerlab.org_rosetta/minirosetta_3.52_x86_64-pc-linux-gnu

would admin like to confirm/clarify this?

Yes, they are the same version with the exception of the Android app. We are mainly trying to get some data from android platforms to get an idea of success rates etc.

---

I have yet to receive ANY work for my Nexus 7 Android tablet HOST# 32700 since I attached it on 13 Jun 2014 13:56:02 UTC.
I posted about this here but never received any response.

---

Yes, they are the same version with the exception of the Android app. We are mainly trying to get some data from android platforms to get an idea of success rates etc.

Uh, ok, now i understand why is not optimized very well for android.
Hope for future versione...

Had this one fail with this error message

WU 3128681

ERROR: Fullatom mismatch in checkpointer.
ERROR:: Exit from: ......srcprotocolscheckpointCheckPointer.cc line: 379

ERROR: core::pose::symmetry::is_symmetric( native_pose ) || core::pose::symmetry::is_symmetric( pose )
ERROR:: Exit from: ......srccorescoringrms_util.cc line: 1217
std::cerr: Exception was thrown:


[ERROR] EXCN_utility_exit has been thrown from: ......srccorescoringrms_util.cc line: 1217
ERROR: core::pose::symmetry::is_symmetric( native_pose ) || core::pose::symmetry::is_symmetric( pose )

Conan

---

Graphic is black on all relax_2 wus

3303788

Unpacking data: ../../projects/ralph.bakerlab.org/3cx2.1.ralph_test_bbonly.zip
Setting database description ...
Setting up checkpointing ...
Setting up graphics native ...
BOINC:: Worker startup.
Starting watchdog...
Watchdog active.
# cpu_run_time_pref: 7200

ERROR: Can't create a polymer bond after residue 31 due to incompatible type: ALA_p:CtermTruncation
ERROR:: Exit from: ......srccoreconformationConformation.cc line: 643
std::cerr: Exception was thrown:


[ERROR] EXCN_utility_exit has been thrown from: ......srccoreconformationConformation.cc line: 643
ERROR: Can't create a polymer bond after residue 31 due to incompatible type: ALA_p:CtermTruncation

ERROR: Can't create a polymer bond after residue 31 due to incompatible type: ALA_p:CtermTruncation
ERROR:: Exit from: ......srccoreconformationConformation.cc line: 643
std::cerr: Exception was thrown:

[ERROR] EXCN_utility_exit has been thrown from: ......srccoreconformationConformation.cc line: 643
ERROR: Can't create a polymer bond after residue 31 due to incompatible type: ALA_p:CtermTruncation

Same here and here

New message on my manager on Windows 8.1 64 bit

Rosetta Mini Beta is not available for your type of computer.

I am currently running a bunch of WUs already on two windows machines. None the less, I am getting a "Rosetta Mini Beta is not available for your type of computer." message when my computers are looking for new work.

Could anyone elaborate? Has there been some sort of change in the last hour or so?

Had 3 failed work units on Linux 64 Bit

This error on Result 3296207

ERROR: Can't create a polymer bond after residue 9 due to incompatible type: ASP_p:CtermTruncation
ERROR:: Exit from: src/core/conformation/Conformation.cc line: 643
std::cerr: Exception was thrown:

[ERROR] EXCN_utility_exit has been thrown from: src/core/conformation/Conformation.cc line: 643
ERROR: Can't create a polymer bond after residue 9 due to incompatible type: ASP_p:CtermTruncation

This error on Result 3300622

ERROR: Can't create a polymer bond after residue 52 due to incompatible type: VAL_p:CtermTruncation
ERROR:: Exit from: src/core/conformation/Conformation.cc line: 643
std::cerr: Exception was thrown:

[ERROR] EXCN_utility_exit has been thrown from: src/core/conformation/Conformation.cc line: 643
ERROR: Can't create a polymer bond after residue 52 due to incompatible type: VAL_p:CtermTruncation

This error on Result 3304866

ERROR: Can't create a polymer bond after residue 73 due to incompatible type: ALA_p:CtermTruncation
ERROR:: Exit from: src/core/conformation/Conformation.cc line: 643
std::cerr: Exception was thrown:

[ERROR] EXCN_utility_exit has been thrown from: src/core/conformation/Conformation.cc line: 643
ERROR: Can't create a polymer bond after residue 73 due to incompatible type: ALA_p:CtermTruncation

All to do with "relax_xxxx.x_ralph_test_bbonly_" type work units (where xxxx.x changes).

Conan

---

New message on my manager on Windows 8.1 64 bit

Rosetta Mini Beta is not available for your type of computer.

I am also getting this message on my Windows XP 32 Bit computers, and can't get any work.

Conan

---

I've deprecated the minirosetta_beta app on all platforms except for android to facilitate debugging the android app.

---