Rosetta mini beta and/or android 3.61-3.83

Message boards : RALPH@home bug list : Rosetta mini beta and/or android 3.61-3.83

To post messages, you must log in.

Previous · 1 . . . 8 · 9 · 10 · 11 · 12 · Next

AuthorMessage
Profile [VENETO] boboviz

Send message
Joined: 9 Apr 08
Posts: 908
Credit: 1,892,541
RAC: 294
Message 6181 - Posted: 22 Apr 2017, 9:21:06 UTC - in response to Message 6180.  

I aborted those that I had at 99%.


After 150h i quit.
I think it's a bug of these wus
No problems with "ab_12_01_...." wus
ID: 6181 · Report as offensive    Reply Quote
Profile [VENETO] boboviz

Send message
Joined: 9 Apr 08
Posts: 908
Credit: 1,892,541
RAC: 294
Message 6182 - Posted: 26 Apr 2017, 7:14:09 UTC - in response to Message 6166.  
Last modified: 26 Apr 2017, 7:14:23 UTC

The arm app is running the latest Rosetta version.


The 3.8 version??
ID: 6182 · Report as offensive    Reply Quote
Admpicard999

Send message
Joined: 4 Sep 16
Posts: 2
Credit: 1,257
RAC: 0
Message 6183 - Posted: 4 May 2017, 13:58:09 UTC - in response to Message 6182.  

I have a WU that has been running 215+ hours, now at 99.7%. it's been at 99+ for at least a week. The deadline was now several days ago. At what point to do I give up and cancel the WU?
ID: 6183 · Report as offensive    Reply Quote
Profile [VENETO] boboviz

Send message
Joined: 9 Apr 08
Posts: 908
Credit: 1,892,541
RAC: 294
Message 6184 - Posted: 5 May 2017, 18:16:45 UTC - in response to Message 6183.  

I have a WU that has been running 215+ hours, now at 99.7%. it's been at 99+ for at least a week. The deadline was now several days ago. At what point to do I give up and cancel the WU?


Kill it
ID: 6184 · Report as offensive    Reply Quote
BQL_FFM

Send message
Joined: 7 Oct 16
Posts: 1
Credit: 53,648
RAC: 0
Message 6185 - Posted: 7 May 2017, 11:09:35 UTC

4051342
Name ab_12_01__vall_2011_1rnbA_vall_2011_9mers_3mers_20564_374_0
Workunit 3565236

4051267
Name ab_12_01__vall_2011_1lisA_vall_2011_9mers_3mers_20564_373_0
Workunit 3565167

Tasks aborted, the started again and again after max ca. 60 seconds.
ID: 6185 · Report as offensive    Reply Quote
Profile [VENETO] boboviz

Send message
Joined: 9 Apr 08
Posts: 908
Credit: 1,892,541
RAC: 294
Message 6211 - Posted: 30 Sep 2017, 8:46:11 UTC

Rosetta
Rosetta beta
Rosetta mini
Rosetta mini beta

I'm little bit confused... :-)
ID: 6211 · Report as offensive    Reply Quote
Profile dekim
Volunteer moderator
Project administrator
Project developer
Project scientist

Send message
Joined: 20 Jan 06
Posts: 250
Credit: 543,579
RAC: 0
Message 6212 - Posted: 2 Oct 2017, 18:18:23 UTC - in response to Message 6211.  

The latest boinc client release, 7.8.2 is buggy. The BOINC developers are working on a fix but not knowing how long it may take, I will be testing application side fixes for the minirosetta app. The main issue is that work may run in dirty slot directories and when this happens our application crashes. It's causing a 10-20% increase in failures.
ID: 6212 · Report as offensive    Reply Quote
Profile [VENETO] boboviz

Send message
Joined: 9 Apr 08
Posts: 908
Credit: 1,892,541
RAC: 294
Message 6213 - Posted: 2 Oct 2017, 19:57:25 UTC - in response to Message 6212.  

The latest boinc client release, 7.8.2 is buggy. The BOINC developers are working on a fix but not knowing how long it may take, I will be testing application side fixes for the minirosetta app.


I know this problem, but i was thinking you were abandoning the "old" 3.x versions....
ID: 6213 · Report as offensive    Reply Quote
Profile dekim
Volunteer moderator
Project administrator
Project developer
Project scientist

Send message
Joined: 20 Jan 06
Posts: 250
Credit: 543,579
RAC: 0
Message 6214 - Posted: 2 Oct 2017, 22:25:47 UTC - in response to Message 6213.  

We are still actively using 3.73 for forward folding and for Robetta structure prediction.
ID: 6214 · Report as offensive    Reply Quote
Roadranner

Send message
Joined: 15 Oct 13
Posts: 4
Credit: 528,888
RAC: 24
Message 6215 - Posted: 3 Oct 2017, 3:34:13 UTC

One task (#4084226) stalled at 83.144%.
I'm going to stop it now.
ID: 6215 · Report as offensive    Reply Quote
Profile [VENETO] boboviz

Send message
Joined: 9 Apr 08
Posts: 908
Credit: 1,892,541
RAC: 294
Message 6218 - Posted: 17 Oct 2017, 7:10:22 UTC - in response to Message 6214.  

We are still actively using 3.73 for forward folding and for Robetta structure prediction.


I notice.
We are still crunching this version on Ralph....
ID: 6218 · Report as offensive    Reply Quote
Profile [VENETO] boboviz

Send message
Joined: 9 Apr 08
Posts: 908
Credit: 1,892,541
RAC: 294
Message 6219 - Posted: 19 Oct 2017, 10:02:51 UTC - in response to Message 6218.  

We are still actively using 3.73 for forward folding and for Robetta structure prediction.


I notice.
We are still crunching this version on Ralph....


My fault. I'm crunching 3.78 app.
I hope we start to test largely the 4.x version
ID: 6219 · Report as offensive    Reply Quote
TPCBF

Send message
Joined: 20 Jun 11
Posts: 30
Credit: 27,776
RAC: 0
Message 6220 - Posted: 19 Oct 2017, 17:19:51 UTC - in response to Message 6215.  

One task (#4084226) stalled at 83.144%.
Got about a dozen or so he last couple of days. They all would end up in a compute error or stall out at various percentages in the 70-90% range, blocking any other useful WU from running.
I noticed that pretty much all WUs checkpoint after about 13 secs, then won't show another checkpoint for hours until they crap out.
Also, I had to manually remove a dozen or so dead tasks in the task manager to get my machine responsive again...
Have the last two running right now, which show a slightly different behaviour (at least while I can watch them). Started about 15min ago, they show 12% done, 12 min of CPU time vs 15 clock time and the check point increasing each time I check by about 10 secs, but still a fraction of the indicated CPU time used.
I am using BOINC agent 7.8.3 on an 8GB/i3/Windows 8.1 host...
ID: 6220 · Report as offensive    Reply Quote
Profile [VENETO] boboviz

Send message
Joined: 9 Apr 08
Posts: 908
Credit: 1,892,541
RAC: 294
Message 6489 - Posted: 16 Jan 2018, 22:36:35 UTC

A lot of errors on my Win10

4192704
4192348
etc.


ERROR: Warning: can't open file t000_.fasta!
ERROR:: Exit from: ......srccoresequenceutil.cc line: 148
BOINC:: Error reading and gzipping output datafile: default.out
called boinc_finish
[/quote]
ID: 6489 · Report as offensive    Reply Quote
Dr Who Fan
Avatar

Send message
Joined: 2 Sep 06
Posts: 76
Credit: 107,857
RAC: 0
Message 6490 - Posted: 17 Jan 2018, 5:07:03 UTC - in response to Message 6489.  

Same error on 4 tasks:
4191210
4191171
4189917
4189960

ERROR: Warning: can't open file t000_.fasta!
ERROR:: Exit from: ......srccoresequenceutil.cc line: 148
BOINC:: Error reading and gzipping output datafile: default.out
called boinc_finish


ID: 6490 · Report as offensive    Reply Quote
Profile [VENETO] boboviz

Send message
Joined: 9 Apr 08
Posts: 908
Credit: 1,892,541
RAC: 294
Message 6491 - Posted: 17 Jan 2018, 6:42:26 UTC - in response to Message 6489.  

ERROR: Warning: can't open file t000_.fasta!
ERROR:: Exit from: ......srccoresequenceutil.cc line: 148
BOINC:: Error reading and gzipping output datafile: default.out
called boinc_finish



These above are errors after few seconds, others after 2 or 3 hours
4193187
4193217
etc

======================================================
DONE ::     1 starting structures  14521.4 cpu seconds
This process generated      1 decoys from       1 attempts
======================================================
BOINC :: WS_max 3.40202e+008

BOINC :: Watchdog shutting down...
BOINC :: BOINC support services shutting down cleanly ...
called boinc_finish

</stderr_txt>
<message>
upload failure: <file_xfer_error>
  <file_name>e8bf7_SOL_jumping_all_pairings_SAVE_ALL_OUT_20700_2_1_r875276919_0</file_name>
  <error_code>-240 (stat() failed)</error_code>
</file_xfer_error>
</message>
ID: 6491 · Report as offensive    Reply Quote
Mad_Max

Send message
Joined: 15 Nov 12
Posts: 15
Credit: 404,700
RAC: 0
Message 6492 - Posted: 17 Jan 2018, 21:32:14 UTC

ALL of my WUs from latest batch errored out

Some very soon(just 1-2 min) after start with similar errors:
ERROR: Warning: can't open file t000_.fasta!
ERROR:: Exit from: ......srccoresequenceutil.cc line: 148
BOINC:: Error reading and gzipping output datafile: default.out


Other near the end of computation with another errors:
<message>
upload failure: <file_xfer_error>
  <file_name>40a6c_SOL_jumping_all_pairings_SAVE_ALL_OUT_20700_2_1_r1951005696_0</file_name>
  <error_code>-161 (not found)</error_code>
</file_xfer_error>
</message>
ID: 6492 · Report as offensive    Reply Quote
Dr Who Fan
Avatar

Send message
Joined: 2 Sep 06
Posts: 76
Credit: 107,857
RAC: 0
Message 6493 - Posted: 20 Jan 2018, 6:42:18 UTC - in response to Message 6492.  

SAME HERE:
Application version	Rosetta Mini v3.78 
windows_intelx86

TASK 4193784
======================================================
DONE ::     1 starting structures  25656.8 cpu seconds
This process generated      2 decoys from       2 attempts
======================================================
BOINC :: WS_max 4.0303e+008

BOINC :: Watchdog shutting down...
BOINC :: BOINC support services shutting down cleanly ...
called boinc_finish

</stderr_txt>
<message>
upload failure: <file_xfer_error>
  <file_name>84897_SOL_jumping_all_pairings_SAVE_ALL_OUT_20700_10_1_r1828484885_0</file_name>
  <error_code>-240 (stat() failed)</error_code>
</file_xfer_error>
</message>
]]>


ID: 6493 · Report as offensive    Reply Quote
Profile PDW

Send message
Joined: 30 Aug 14
Posts: 6
Credit: 1,832,794
RAC: 0
Message 6514 - Posted: 28 Mar 2018, 9:09:03 UTC

https://ralph.bakerlab.org/workunit.php?wuid=3786787

bdff5_MEM_cplu_180319_jumping_all_pairings_SAVE_ALL_OUT_IGNORE_THE_REST_20754_3

Errors out with...

Unpacking zip data: ../../projects/ralph.bakerlab.org/minirosetta_database_d0bf94b.zip
Unpacking WU data ...
Unpacking data: ../../projects/ralph.bakerlab.org/bdff5_MEM_cplu_180319.zip
Setting database description ...
Setting up checkpointing ...
Setting up graphics native ...
Setting up folding (abrelax) ...

ERROR: [ERROR] Unable to open constraints file: bdff5_MEM_t000.cst
ERROR:: Exit from: ......srccorescoringconstraintsConstraintIO.cc line: 461
BOINC:: Error reading and gzipping output datafile: default.out
called boinc_finish
ID: 6514 · Report as offensive    Reply Quote
Profile PDW

Send message
Joined: 30 Aug 14
Posts: 6
Credit: 1,832,794
RAC: 0
Message 6515 - Posted: 28 Mar 2018, 13:31:21 UTC - in response to Message 6514.  

These two:
https://ralph.bakerlab.org/workunit.php?wuid=3786735
https://ralph.bakerlab.org/workunit.php?wuid=3786774

had this error...

Starting work on structure: _00001

ERROR: p>=1 && p<= (int) pairings_.size()
ERROR:: Exit from: ......srcprotocolsjumpingSheetBuilder.cc line: 157
BOINC:: Error reading and gzipping output datafile: default.out
called boinc_finish
ID: 6515 · Report as offensive    Reply Quote
Previous · 1 . . . 8 · 9 · 10 · 11 · 12 · Next

Message boards : RALPH@home bug list : Rosetta mini beta and/or android 3.61-3.83



©2024 University of Washington
http://www.bakerlab.org